1
Revised 12/2/13
Product Description
Designed for permanent attachment, PW Series ?
wave whips give outstanding performance in a
rugged and cost-effective package. The antenna
is attached by placing its base through a ? (6.35
mm) hole in the product and securing it with a
nut or by threading it into a PEM-style insert. This
method of attachment is highly secure and saves
the cost of an antenna connector. The antenna
is fed through the base with RG-174 coax cable,
which may be soldered directly to the board or
attached using a 50-ohm connector. Standard
cable length is 8.5" (21.59 cm). Custom lengths
and terminations are available by special order.
Features
Low cost
Outstanding performance
Omni-directional pattern
Wide bandwidth
Flexible main shaft
Rugged & weatherized
Integral 8.5" (21.59 cm) RG-174 coax cable
Use with plastic or metal enclosures
Electrical Specifications
Center frequency:
2.45GHz
Bandwidth:
250MHz
Wavelength:     
?wave
VSWR:
d 1.9 typical at center
Peak Gain:
1.6dBi
Impedance:
50-ohms
Connection:     
Case-mount
Cable:
18.5" (21.59 cm) RG-174 coax
Oper. Temp. Range:
40癈 to +90癈
Electrical specifications and plots measured on 10.16 cm x 10.16 cm
(4.00" x 4.00") reference ground plane
ANT-2.4-PW-QW
Data Sheet
by
Ordering Information
ANT-2.4-PW-QW
1/4-28
UNF
5.0 mm
(0.20")
7.8 mm
(0.31")
13.5 mm
(0.53")
105.0 mm
(4.13")
14.5 mm
(0.57")
7/16"
HEX
End
View